Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Removal of pressure in fuel system
   + 6.4. Check of the fuel pump
   6.5. Fuel pump
   - 6.6. Fuel level sensor
      6.6.2. Replacement
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of the mode of idling of the air conditioning system
   6.16. Air inlet camera (only V6 engines)
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



6.6. Fuel level sensor

6.6.1. Check

PERFORMANCE ORDER
1. Fill in a full tank of fuel.
2. Remove back sitting and a protective cover of the fuel tank.
3. Disconnect the electric socket from the fuel tank.
4. Using an ohmmeter, check resistance between contact ми 1 and 2 electric sockets.
At a full tank resistance between contacts 1 and 2 has to make 2–3 Ohms.
5. Connect into place the electric socket and spend fuel almost to an empty tank.
6. Measure resistance between contacts of 1 and 2 electric sockets which has to make 110–115 Ohms on the empty fuel tank.
7. If resistance of the fuel level sensor does not correspond to the required values, replace the sensor. Resistance of the sensor can also be measured, having removed the sensor from the fuel tank and moving it with a hand.