Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Removal of pressure in fuel system
   + 6.4. Check of the fuel pump
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of the mode of idling of the air conditioning system
   6.16. Air inlet camera (only V6 engines)
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

6.5. Fuel pump

1. Uncover a fuel-filling mouth.
2. Remove a weight wire from the accumulator.

In the presence in the code radio receiver against theft, before a detachment of the accumulator check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

3. Remove a back seat.
4. For access to the fuel tank unscrew screws and remove a protective cover.
5. Disconnect the electric socket and fuel-supply lines.
6. Unscrew bolts of fastening of a cover of the fuel pump.
7. Take the fuel pump from the fuel tank.
8. Take the lower part of the fuel pump from a suspension bracket.
9. Remove rubber laying from the lower part of the fuel pump.
10. Remove the bracket fixing a toplivozabornik to the fuel pump.
11. Remove a toplivozabornik and check his state.
12. If replacement of the fuel pump is made, weaken a collar and remove a pressure head hose from the fuel pump.
13. Disconnect wires from the fuel pump and remove the pump.
14. Installation is made in the sequence, the return to removal.