Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12:10. Brake pipelines and hoses
   12:11. Pumping of the hydraulic brake system
   + 12:12. Vacuum amplifier of brakes
   12:13. Replacement of brake shoes of the emergency brake on back disk brakes
   + 12:14. Adjustment of the parking brake
   + 12:15. Replacement of a cable of the emergency brake
   + 12:16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




BRAKE SYSTEM

12. Brake system

12.1. Technical characteristic

GENERAL INFORMATION

Disk brakes

Thickness of a forward disk:
– nominal
28 mm
– minimum
26 mm
Thickness of a back disk:
– nominal
10 mm
– minimum
9 mm
Beating of a brake disk
0,05 mm
Minimum thickness of a block of the emergency brake
0,8 mm

Drum brakes

Thickness of a brake slip
1,6 mm
Internal diameter of a drum:
– nominal
228,6 mm
– maximum
230 mm

Tightening moments

Bolts of fastening of a support:

– forward support

30 Nanometer
– back support
20 Nanometer

Brake tubes

26 Nanometer
Bolts of fastening of the working brake cylinder
10 Nanometer
The main brake cylinder to the vacuum amplifier
12 Nanometer
The vacuum amplifier of brakes to a partition
12 Nanometer