Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
- 3. Six-cylinder V6 engines
   3.2. General information
   3.3. The repair which is not demanding removal of the engine
   + 3.4. Top Dead Point (TDP) of the piston of the first cylinder
   + 3.5. Cover of a head of the block of cylinders
   + 3.6. Inlet collector
   3.7. Final collector
   + 3.8. Gear belt and pulleys
   3.9. Replacement of a forward sealing ring of a bent shaft
   3.10. Replacement of sealing rings of camshafts
   + 3.11. Camshafts and pushers
   + 3.12. Head of the block of cylinders
   + 3.13. Oil pallet
   + 3.14. Oil pump
   3.15. Drive flywheel / plate
   3.16. Replacement of a back sealing ring of a bent shaft
   3.17. Suspension bracket of the power unit
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



3.10. Replacement of sealing rings of camshafts

GENERAL INFORMATION

Installation of a sealing ring of the camshaft

PERFORMANCE ORDER

1. Take off a gear belt and a pulley of a bent shaft.

2. Unscrew bolts and remove a back casing of a gear belt.

3. Note depth of installation of a sealing ring and, using the screw-driver, take a sealing ring from a nest.
4. Clear a nest of a sealing ring and oil a new sealing ring pure engine.
5. Using a tubular mandrel of the corresponding diameter, establish a sealing ring of the camshaft.
6. Establish a back casing of a gear belt and fix by bolts.
7. Establish a pulley of the camshaft and a gear belt.