Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
- 15. Electric equipment
   15.2. General information
   15.3. Electric chains
   + 15.4. Detection of not closed chain
   15.5. Safety locks
   15.6. Relay
   + 15.7. Multipurpose switches of a steering column
   + 15.8. Ignition lock
   15.9. Switch of a heater of back glass
   15:10. Check of a heater of back glass
   15:11. Radio receiver
   15:12. Loudspeakers
   15:13. Antenna
   15:14. Replacement of bulbs of headlights
   15:15. Adjustment of light of headlights
   15:16. Headlight
   + 15:17. Replacement of bulbs of an incandescence
   + 15:18. Screen wiper engine
   15:19. Combination of devices
   15:20. Sound signal
   15:21. System cruise control
   15:22. Window regulators with the electric drive
   15:23. System of the central blocking of locks
   15:24. Rear-view mirrors with the electric drive
   15:25. Safety airbag
   + 15:26. Schemes of electric equipment




15:24. Rear-view mirrors with the electric drive

GENERAL INFORMATION

Arrangement of elements of management of external rear-view mirrors with the electric drive
 
1 – left rear-view mirror;
2 – right rear-view mirror;

3 – switch of provision of a mirror;
4 – connecting block No. 1


Removal of the switch of adjustment of provision of an external mirror

 


Use of a digital ohmmeter for check of a condition of contacts of the switch of a mirror

 


The switch of adjustment of provision of a mirror and condition of contacts at various provisions of the switch

 

For management of the provision of an external rear-view mirror it is used in each mirror on two electric motors.

Adjustment of provision of an external rear-view mirror with the electric drive is possible only after inclusion of ignition.

For check of operability of the engine, turn on the switch and listen whether there is a sound of the working engine.

If the engine works, but the mirror does not move probably there is a defect of the drive in a mirror.

If the mirror does not move and the engine does not work, check a safety lock in the block of safety locks located on the left side under the dashboard.

If a safety lock whole, remove a decorative overlay of a combination of devices for access to a back part of the switch of mirrors. Without disconnecting the electric socket from the switch, include ignition and check tension on the switch. Tension has to be present at one contact of the socket. If tension is absent, check an electric chain between the block of safety locks and the switch.

If tension moves to the switch, disconnect from it the electric socket and check serviceability of the switch (see rice. Removal of the switch of adjustment of provision of an external mirror, rice. Use of a digital ohmmeter for check of a condition of contacts of the switch of a mirror, rice. The switch of adjustment of provision of a mirror and a condition of contacts at various provisions of the switch).