Toyota Camry

1992-1997 of release

Repair and operation of the car


Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
- 5. Cooling and heating
   5.2. General information
   5.3. Antifreeze
   5.4. Cooling system hoses
   + 5.5. Check and replacement of the thermostat
   + 5.6. Check and replacement of the fan of a radiator and relay
   + 5.7. The radiator fan (the V6 models from 1992 to 1994)
   + 5.8. Radiator
   5.9. Broad tank
   + 5.10. Water pump
   - 5.11. Sensor of temperature of cooling liquid
      5.11.2. Replacement
   5.12. Heater fan
   5.13. Heater fan resistor
   5.14. Heater radiator
   + 5.15. Control panel of a heater
   5.16. Air conditioning system
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




5.11.2. Replacement
GENERAL INFORMATION

For access to temperature sensor on the engine 3VZ-FE V6 unscrew two bolts of fastening of the thermofilter and remove it.

PERFORMANCE ORDER
1. Merge cooling liquid from the engine cooling system.
2. Disconnect the electric socket from temperature sensor.
3. Unscrew the sensor of temperature of cooling liquid.
4. Screw in the new sensor and tighten it the required moment.
Connect the electric socket to the sensor and fill in cooling liquid in the engine.