Toyota Camry

1992-1997 of release

Repair and operation of the car


Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
- 5. Cooling and heating
   5.2. General information
   5.3. Antifreeze
   5.4. Cooling system hoses
   + 5.5. Check and replacement of the thermostat
   + 5.6. Check and replacement of the fan of a radiator and relay
   + 5.7. The radiator fan (the V6 models from 1992 to 1994)
   + 5.8. Radiator
   5.9. Broad tank
   + 5.10. Water pump
   + 5.11. Sensor of temperature of cooling liquid
   5.12. Heater fan
   5.13. Heater fan resistor
   5.14. Heater radiator
   + 5.15. Control panel of a heater
   5.16. Air conditioning system
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




5.2. General information
GENERAL INFORMATION

Engine cooling system elements
1 – branch pipe of intake of cooling liquid;
2 – thermostat;
3 – water pump; 		4 – IAC valve;
5 – an exit of cooling liquid from the engine;
6 – oil heater

Giving branch pipe arrangement in the engine of cooling liquid on the engine 1MZ-FE V6
Preventions

When opening a cover of a broad tank on the hot engine it is necessary to be careful as the coming-out hot vapors can lead to severe burns.

Do not allow hit of cooling liquid on clothes and a paint and varnish covering of a body. Otherwise wash out a surface a plentiful amount of water.

After switching off of the hot engine the radiator fan can turn on.

The cooling system of tight type turns on the pump, a radiator, a broad tank, the electric fan of a radiator and the thermostat. At start of the cold engine cooling liquid circulates around the block of cylinders, a head of the block and a final collector. Warm cooling liquid passes through a radiator of a heater and comes back to the water pump. As cooling liquid when heating extends, its level in a broad tank increases. Intake of cooling liquid through a radiator is closed that provides the closed thermostat. When cooling liquid reaches the predetermined temperature, the thermostat opens and hot cooling liquid passes through a hose to a radiator. As cooling liquid passes through a radiator, there is its cooling with a stream of counter air. The electric fan of cooling of a radiator installed behind a radiator is run by the thermal sensor located in a radiator. Dopolnitel but to the ordinary sensor of the index of temperature of cooling liquid temperature switches and sensors for ensuring work of system of injection of fuel and system of ignition are installed.