1. Lift a forward part of the car and record on supports. Remove a forward wheel. |
|
2. Record steering draft and unscrew a lock-nut of steering draft on a quarter of a turn. Do not move a lock-nut from this situation as it will serve as a reference point at installation of a new tip of steering draft. |
|
3. At full unscrewing of a lock-nut, using paint, note the provision of a steering rod end on a carving of steering draft. |
|
4. Take the forelock and unscrew a nut of fastening of the spherical hinge of a tip of steering thirst for a rotary fist. Using a stripper, take the spherical hinge of a tip of steering draft from a rotary fist. |
5. Unscrew a tip of steering draft from steering draft, having counted the exact speed of a tip of steering draft. |