Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   - 12.9. Main brake cylinder
      12.9.2. Repair
      12.9.3. Installation
   12:10. Brake pipelines and hoses
   12:11. Pumping of the hydraulic brake system
   + 12:12. Vacuum amplifier of brakes
   12:13. Replacement of brake shoes of the emergency brake on back disk brakes
   + 12:14. Adjustment of the parking brake
   + 12:15. Replacement of a cable of the emergency brake
   + 12:16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

12.9.3. Installation

1. Install the main brake cylinder on racks of the vacuum amplifier of brakes and fix by nuts, having tightened them at this stage by hand.
2. Unscrew carving traffic jams from the main brake cylinder and on their place screw in brake pipelines.
3. Finally tighten nuts of fastening of the main brake cylinder.

4. Remove the air from the main brake cylinder which got there at installation of brake tubes. Sharply press a brake pedal, unscrew on a turn floor a nut of fastening of a brake tube to the main brake cylinder at the pressed pedal. Continuing to press a pedal, force out the liquid which is in system together with air. After the pedal will reach extreme forward situation and the effluence of liquid will stop, put the clamp of fastening of the pipeline. Repeat these operations, the air outlet from the main brake cylinder will not stop yet.