Toyota Camry

1992-1997 of release

Repair and operation of the car


Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
- 3. Six-cylinder V6 engines
   3.2. General information
   3.3. The repair which is not demanding removal of the engine
   - 3.4. Top Dead Point (TDP) of the piston of the first cylinder
      3.4.1. Engine 3VZ-FE
      3.4.2. Engine 1MZ-FE
   + 3.5. Cover of a head of the block of cylinders
   + 3.6. Inlet collector
   3.7. Final collector
   + 3.8. Gear belt and pulleys
   3.9. Replacement of a forward sealing ring of a bent shaft
   3.10. Replacement of sealing rings of camshafts
   + 3.11. Camshafts and pushers
   + 3.12. Head of the block of cylinders
   + 3.13. Oil pallet
   + 3.14. Oil pump
   3.15. Drive flywheel / plate
   3.16. Replacement of a back sealing ring of a bent shaft
   3.17. Suspension bracket of the power unit
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




3.4.2. Engine 1MZ-FE
PERFORMANCE ORDER

1. The engine 1MZ-FE has no ignition distributor, and on each spark plug the ignition coil which is operated computer signals is installed. For definition of VMT of the piston of the first cylinder in a step of compression remove the ignition coil with a high-voltage wire and unscrew a spark plug.

2. In an opening for a candle screw in the manometer with an adapter.
3. Rotating a bent shaft of the engine, and watching indications of the manometer, define the moment when pressure shown by the manometer ceases to increase. It demonstrates that the piston of the first cylinder was installed in VMT in a compression step.