Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
14.1.1. Security measures when carrying out welding works
+ 14.2. Care of a body
+ 14.3. Care of an upholstery and rugs
- 14.4. Repair of insignificant damages of a body
14.4.2. Repair of dents in a body design
14.4.3. Repair of the rusted openings or holes in a body design
14.4.4. Filling and painting of a body
14.5. Repair of strong damages of a body
+ 14.6. Cowl
14.7. Trunk lid
14.8. Back door
+ 14.9. Replacement of racks of support
14:10. Door upholstery
+ 14:11. Doors
+ 14:12. Lock, cylinder of the lock and handle of opening of a door
14:13. Door glass
14:14. Window regulator
14:15. Front bumper
14:16. Rear bumper
14:17. External rear-view mirrors
+ 14:18. Seats
14:19. Decorative overlay of a combination of devices
14:20. Casings of a steering column
14:21. Central console
14:22. Ware box
14:23. Check of a condition of seat belts
14:24. Front grille
14:25. Engine mudguard
+ 15. Electric equipment
|
Remove paint from the damaged area and approximately on 20 mm around it. Using a metal brush, clear the showered rust from the surface of the bared metal on the damaged area. Process the damaged area rust solvent according to its instruction. Close an opening from a rust or a hole the metal gauze or a strip of aluminum foil. Cut out the piece of a grid which is approximately corresponding to an opening form, enclose it in an opening so that its edges did not act over the level of the panel surrounding an opening. Fix it by means of several lumps of spackling paste on perimeter. Using the screw-driver handle, level the ends of a grid so that it densely adjoined to body metal. Further produce filling, painting and polishing of the damaged site of a body. |
|