Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   - 12.9. Main brake cylinder
      12.9.2. Repair
      12.9.3. Installation
   12:10. Brake pipelines and hoses
   12:11. Pumping of the hydraulic brake system
   + 12:12. Vacuum amplifier of brakes
   12:13. Replacement of brake shoes of the emergency brake on back disk brakes
   + 12:14. Adjustment of the parking brake
   + 12:15. Replacement of a cable of the emergency brake
   + 12:16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




12.9. Main brake cylinder

12.9.1. Removal

GENERAL INFORMATION

Main brake cylinder
1 – an adapter with three tubes;
2 – an adapter with two tubes;
3 – main brake cylinder;
4 – laying;
5 – vacuum amplifier of brakes

PERFORMANCE ORDER
1. Disconnect the electric socket from a tank with brake fluid.
2. Uncover a tank of the brake system and, using the syringe, pump out brake fluid.
3. Mark the brake tubes suitable to the main brake cylinder. Arrange pure rags under the main brake cylinder. Unscrew nuts of fastening of brake tubes and take aside from the main brake cylinder brake tubes. Close the ends of tubes the corresponding traffic jams.
4. Unscrew nuts of fastening and remove the main brake cylinder from the vacuum amplifier of brakes together with laying