Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
- 8. Decrease in toxicity
   8.2. General information
   8.3. System of electronic control (TCCS)
   8.4. System of self-diagnostics
   - 8.5. Sensors
      8.5.2. Oxygen sensor
      8.5.3. Sensor of provision of a butterfly valve
      8.5.4. Air stream measuring instrument (only engines 3VZ-FE V6)
      8.5.5. MAF sensor of measurement of mass of a stream of air (engine 1MZ-FE V6)
      8.5.6. Sensor of absolute pressure (four-cylinder engines)
      8.5.7. EGR temperature sensor
      8.5.8. Car speed sensor
      8.5.9. The detonation sensor (only with V6 engines)
      8.5.10. Sensor of position of the camshaft (engine 1MZ-FE V6)
      8.5.11. Sensor of an angle of rotation of a bent shaft (only engines 1MZ-FE V6)
   + 8.6. Induction system of air supply in the engine (ACIS)
   8.7. System of catching of vapors of fuel (EVAP)
   + 8.8. System of repeated combustion of exhaust gases (EGR)
   8.9. System of ventilation of a case (PCV)
   8.10. Catalyst
   8.11. Codes of malfunctions
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




8.5. Sensors

8.5.1. Sensor of temperature of cooling liquid

GENERAL INFORMATION

Dependence of resistance of the sensor of temperature of cooling liquid on temperature
 

Arrangement of the sensor of temperature of cooling liquid on the four-cylinder engine
 

The sensor of temperature of cooling liquid is a thermistor which changes the resistance depending on temperature. At reduction of temperature of the sensor its resistance increases, and at increase in temperature to a soprotivla ny decreases.

PERFORMANCE ORDER

1. For check of the sensor take temperatures of cooling liquid its resistance at various temperatures.

2. If necessary check an electric chain of the sensor of temperature of cooling liquid.
3. For removal of the sensor remove from it the electric socket and unscrew the sensor.