Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
- 7. System of ignition
   7.2. Accumulator
   + 7.3. System of ignition
   - 7.4. Check of system of ignition
      7.4.2. System of ignition without ignition distributor
   + 7.5. Ignition coil
   + 7.6. Ignition distributor
   7.7. Check and adjustment of a corner of an advancing of ignition
   7.8. Block of ignition (switchboard)
   + 7.9. Sensor of impulses
   7.10. System of charging
   7.11. Generator
   7.12. Check and replacement of components of the generator
   7.13. System of start of the engine
   7.14. Starter
   7.15. Traction relay
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




7.4.2. System of ignition without ignition distributor

PERFORMANCE ORDER
1. Using a special tester for check of system of ignition without distributor, connect a tester clip to the weight and a high-voltage wire and turning the engine a starter, watch a tester electrode to define existence of a spark.
2. If the spark is present, so on a spark plug tension moves. Similarly check presence of a spark on other cylinders.
3. If the spark is absent or its admissions are observed, check tension on the ignition coil.
4. If the spark still is absent, check sensors the provision of distributive and cranked shaft.
5. If the spark still is absent, check receipt of a signal from the ignition block for coils. Remove sockets from each coil and connect a LED sampler. Turning the engine a starter, watch a sampler which has to blink that demonstrates receipt of signals from the ignition block to the coil.
6. If the spark still is absent, replace the ignition block.