Toyota Camry

1992-1997 of release

Repair and operation of the car


Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Removal of pressure in fuel system
   - 6.4. Check of the fuel pump
      6.4.2. Check of pressure created by the fuel pump
      6.4.3. Check of the regulator of pressure of fuel
      - 6.4.4. Check of the relay of the fuel pump
         - 6.4.4.1. Models 1992 and 1993 of year
            6.4.4.1.2. Relay of break of a chain (four-cylinder engines)
            6.4.4.1.3. Relay of break of a chain of six-cylinder engines
         + 6.4.4.2. Models 1994 and 1995 of year
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of the mode of idling of the air conditioning system
   6.16. Air inlet camera (only V6 engines)
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




6.4.4.1.3. Relay of break of a chain of six-cylinder engines
PERFORMANCE ORDER
1. Using an ohmmeter, check resistance of the relay of break of a chain between contacts of ST and E1 and contacts of ID and IC which has to be equal to 0. Resistance between contacts of B and FR has to be equal to infinity.

2. Using additional wires, connect the accumulator to contacts of the relay of break of a chain of ST and E1. At the same time resistance between contacts + to B and FP has to be equal to 0.