Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
- 3. Six-cylinder V6 engines
   3.2. General information
   3.3. The repair which is not demanding removal of the engine
   + 3.4. Top Dead Point (TDP) of the piston of the first cylinder
   + 3.5. Cover of a head of the block of cylinders
   + 3.6. Inlet collector
   3.7. Final collector
   + 3.8. Gear belt and pulleys
   3.9. Replacement of a forward sealing ring of a bent shaft
   3.10. Replacement of sealing rings of camshafts
   + 3.11. Camshafts and pushers
   + 3.12. Head of the block of cylinders
   - 3.13. Oil pallet Installation
      - 3.13.2. Engine 1MZ-FE Installation
   + 3.14. Oil pump
   3.15. Drive flywheel / plate
   3.16. Replacement of a back sealing ring of a bent shaft
   3.17. Suspension bracket of the power unit
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

доксал алюминиевый профиль, ral9006. Installation

1. Clear the interfaced surfaces of the oil pallet and the block of cylinders.
2. Clear the interfaced surfaces steel and алюминиево го oil pallets.

3. Apply a sealant layer in flutes and outside of openings under bolts on the interfaced surface of the aluminum oil pallet.
4. Install aluminum section of the oil pallet on the block of cylinders and fix by bolts.
5. Examine the oil pump and check a condition of the mesh filter of an oil receiver.
6. Apply a layer of sealant with a diameter of 3-4 mm on the interfaced surface of steel section of the oil pallet.
7. Establish steel section of the oil pallet and fix by bolts.
8. Further installation is made in the sequence, the return to removal. Establish a new oil filter and fill in oil in the engine.