Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on repair of the engine on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a bent shaft
   2.9. Replacement of a sealing ring of the camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a bent shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




2.8. Replacement of a forward sealing ring of a bent shaft

PERFORMANCE ORDER
1. Take off a gear belt and a pulley of a bent shaft.
2. Using the screw-driver which edge is wound by an adhesive tape, take a sealing ring of a bent shaft from a nest. At the same time do not damage a nest of a sealing ring and a bent shaft.
3. For simplification of removal of a sealing ring it is possible to cut out an opening in a face surface of a sealing ring.
4. Clear a nest of a sealing ring and oil a new sealing ring pure engine.
5. Using a tubular mandrel of the corresponding diameter, establish a sealing ring on a bent shaft.