|
1. On models with the mechanical transmission check a flywheel for wear from coupling and a condition of teeths of the gear screw. |
|
2. On models with the automatic transmission check a condition of the drive of the hydrotransformer and a gear wreath. |
| 3. Clear the interfaced surfaces of a flywheel and a bent shaft. Establish a flywheel according to earlier put tags and screw up fastening bolts. |
| 4. Record a flywheel from a provorachivaniye and finally tighten bolts of fastening of a flywheel. |
| 5. Further installation is made in the sequence, the return to removal. |