Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on repair of the engine on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   + 2.6. Final collector
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a bent shaft
   2.9. Replacement of a sealing ring of the camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   - 2.14. Drive flywheel / plate
      2.14.2. Installation
   2.15. Replacement of a back sealing ring of a bent shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



2.14. Drive flywheel / plate

2.14.1. Removal

PERFORMANCE ORDER
1. Lift the car and remove the transmission.
2. Note the provision of the leading knot of coupling in relation to a flywheel, using a marker or paint.
3. Gradually in the diagonal sequence weaken bolts of fastening of the leading knot of coupling, turning each bolt on a half of a turn until it is terminated springs and bolts can be unscrewed manually. Remove the leading knot of coupling and a clutch plate from a flywheel.
4. Record a flywheel from a provorachivaniye, having established a clamp on a gear wreath of a flywheel. Apply combination tags on a flywheel and a bent shaft.

5. Unscrew bolts and remove a flywheel. At removal of a plate of the drive on the cars equipped with the automatic transmission at removal of a plate of the drive remove also two laying located from two parties of a plate of the drive.