| 1. Oil pushers pure engine and establish them into place. Check that adjusting laying of ustan of Lena in pushers. |
| 2. Grease necks of bearings and cams of the camshaft with pure engine oil. |
|
3. Install the camshaft in a head of the block of cylinders so that the adjusting pin was turned on 80 ° from the vertical line to the left. |
| |
4. Apply a thin film of sealant on the interfaced surface of a forward cover of the camshaft according to the drawing. |
|
5. Establish covers of bearings of the camshaft according to tags, and shooters have to be directed to a forward part of the engine. |
|
6. Gradually and consistently in the order shown in the drawing tighten bolts of fastening of covers of bearings of the camshaft. |
| 7. Establish a new oil sealing ring of the camshaft. |