Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         + 1.3.5.2. Replacement of cooling liquid
         1.3.5.3. Check of system of catching of vapors of fuel
         1.3.5.4. Check of the exhaust system
         + 1.3.5.5. Replacement of oil in the automatic transmission and the main transfer
         1.3.5.6. Replacement of oil in the makhanichesky transmission
         1.3.5.7. Check of fastening of a suspension bracket
         - 1.3.5.8. Check and replacement of spark plugs
            1.3.5.8.1. Removal
            1.3.5.8.2. Installation
         1.3.5.9. Check and replacement of high-voltage wires and details of the distributor
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




1.3.5.8. Check and replacement of spark plugs

GENERAL INFORMATION

1 – a key for a spark plug vyvinchivaniye;
2 – dynamometer key;
3 – a key head with a ratchet;
4 – extender;
5 – a template for measurement of an interelectrode gap of a candle


Check of an interelectrode gap of a spark plug from an ispolzov niy a template

Adjustment interelectrode leg of a gap of a spark plug of a podgib niy side electrode of a candle

For replacement of spark plugs it is necessary to use a special key for unscrewing of candles with rubber I condense with a shchy ring which allows to take the unscrewed spark plug from a nest.

PERFORMANCE ORDER

1. For replacement of spark plugs gather all necessary tools.

2. Check and, if necessary, adjust an interelectrode a ny gap in new candles.