Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         + Replacement of cooling liquid Check of system of catching of vapors of fuel Check of the exhaust system
         - Replacement of oil in the automatic transmission and the main transfer
   Cleaning of the mesh filter
   Discharge of oil from the main transfer
   Filling with transmission oil Replacement of oil in the makhanichesky transmission Check of fastening of a suspension bracket
         + Check and replacement of spark plugs Check and replacement of high-voltage wires and details of the distributor
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment Cleaning of the mesh filter

1. Unscrew forward bolts of fastening of the oil pallet of the transmission, then weaken back bolts of fastening of the oil pallet.
2. Using the screw-driver, separate the pallet from a case of the transmission and merge the remained oil from the transmission.
3. After the end of discharge of oil from the automatic transmission unscrew the remained bolts and remove the oil pallet of the transmission.
4. Unscrew bolts of fastening of the mesh filter and remove it.
5. Wash out the mesh filter in fresh oil for автоматичес ky transmissions.
6. Install the mesh filter on the transmission and fix by bolts.
7. Clear the interfaced surfaces of a case of the transmission and the oil pallet. Note an arrangement of magnets in the oil pallet, remove them and wash up the pallet in solvent and drain it compressed air. Install magnets on the oil pallet.
8. Install the oil pallet with new laying on the automatic transmission and fix it by bolts, having tightened them the required moment.