Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         - 1.3.5.2. Replacement of cooling liquid
            1.3.5.2.1. Discharge of cooling liquid
            1.3.5.2.2. Washing of the cooling system
            1.3.5.2.3. Filling of the cooling system
         1.3.5.3. Check of system of catching of vapors of fuel
         1.3.5.4. Check of the exhaust system
         + 1.3.5.5. Replacement of oil in the automatic transmission and the main transfer
         1.3.5.6. Replacement of oil in the makhanichesky transmission
         1.3.5.7. Check of fastening of a suspension bracket
         + 1.3.5.8. Check and replacement of spark plugs
         1.3.5.9. Check and replacement of high-voltage wires and details of the distributor
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

1.3.5.2.1. Discharge of cooling liquid

GENERAL INFORMATION

Arrangement of traffic jams of discharge of cooling liquid on the engine 3MZ-FEV6

1 – a stopper of discharge of cooling liquid from a radiator;

2 – a stopper of discharge of cooling liquid from the block of cylinders of the engine

PERFORMANCE ORDER

1. Lift a forward part of the car and record on supports.
2. Remove a radiator stopper.

3. Install a big container under an inlet branch pipe of a radiator. Dress a hose with an internal diameter of 10 mm on the drainage valve to direct cooling liquid to a container, then open the drainage valve.	4. When the stream of the cooling liquid which is coming out a radiator stops, install a container under a drain stopper of the block of cylinders. Unscrew a drain stopper and give the chance to flow down cooling liquid from the block of cylinders.