Repair and operation of the Toyota Camry car - 1.3.5. Each 50 000 km or 24 months//Toyota Camry of 1992-1997 /

Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
- 1. Maintenance
   1.2. Frequency of service
   - 1.3. Maintenance
      + 1.3.1. Each 400 km or weekly
      + 1.3.2. Each 5 000 km or 3 months
      + 1.3.3. Each 10 000 km or 6 months
      + 1.3.4. Each 25 000 km or 12 months
      - 1.3.5. Each 50 000 km or 24 months
         + 1.3.5.2. Replacement of cooling liquid
         1.3.5.3. Check of system of catching of vapors of fuel
         1.3.5.4. Check of the exhaust system
         + 1.3.5.5. Replacement of oil in the automatic transmission and the main transfer
         1.3.5.6. Replacement of oil in the makhanichesky transmission
         1.3.5.7. Check of fastening of a suspension bracket
         + 1.3.5.8. Check and replacement of spark plugs
         1.3.5.9. Check and replacement of high-voltage wires and details of the distributor
      + 1.3.6. Each 100 000 km or 48 months
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



1.3.5. Each 50 000 km or 24 months

1.3.5.1. Replacement of the fuel filter

GENERAL INFORMATION

Prevention

On models since 1993 if the accumulator is switched-off for a long time, the system of a safety cushion will be damaged.


PERFORMANCE ORDER
1. For improvement of access remove a casing of the air filter.
2. Holding the fuel filter from a provorachivaniye, unscrew bolts of fastening of fuel-supply lines to the filter.
3. Unscrew bolts of fastening of a suspension bracket of the fuel filter and remove the fuel filter.
4. Install the new filter according to the marking put on the case of the filter and fix it by bolts.
5. Using new washers, fix fuel-supply lines by bolts.
6. Further installation is made in the sequence, the return to removal.