Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
- 15. Electric equipment
   15.2. General information
   15.3. Electric chains
   - 15.4. Detection of not closed chain
      15.4.2. Detection of a rupture of a chain
      15.4.3. Detection of a source of short circuit
      15.4.4. Detection of bad grounding
   15.5. Safety locks
   15.6. Relay
   + 15.7. Multipurpose switches of a steering column
   + 15.8. Ignition lock
   15.9. Switch of a heater of back glass
   15:10. Check of a heater of back glass
   15:11. Radio receiver
   15:12. Loudspeakers
   15:13. Antenna
   15:14. Replacement of bulbs of headlights
   15:15. Adjustment of light of headlights
   15:16. Headlight
   + 15:17. Replacement of bulbs of an incandescence
   + 15:18. Screen wiper engine
   15:19. Combination of devices
   15:20. Sound signal
   15:21. System cruise control
   15:22. Window regulators with the electric drive
   15:23. System of the central blocking of locks
   15:24. Rear-view mirrors with the electric drive
   15:25. Safety airbag
   + 15:26. Schemes of electric equipment


15.4.3. Detection of a source of short circuit

GENERAL INFORMATION

For detection of a source of short circuit, disconnect chain loading elements in the beginning (elements of loading of a chain are elements which consume electric current, such as bulbs, electric motors, heating elements, etc.).

Remove the corresponding safety lock and connect probes of a tester or the voltmeter to safety lock plugs.

Include food in chains, at the same time do not forget that some chains of electric equipment join only at turn of a key in the ignition lock in a certain situation.

If tension is present (what the control bulb or indications of the voltmeter testifies to), it means that in a chain there is a short circuit.

If when conducting check there is no tension, however the safety lock still fuses at connection of that loading of a chain, it demonstrates failure of an element of loading.