Toyota Camry

1992-1997 of release

Repair and operation of the car


Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
- 15. Electric equipment
   15.2. General information
   15.3. Electric chains
   + 15.4. Detection of not closed chain
   15.5. Safety locks
   15.6. Relay
   + 15.7. Multipurpose switches of a steering column
   + 15.8. Ignition lock
   15.9. Switch of a heater of back glass
   15:10. Check of a heater of back glass
   15:11. Radio receiver
   15:12. Loudspeakers
   15:13. Antenna
   15:14. Replacement of bulbs of headlights
   15:15. Adjustment of light of headlights
   15:16. Headlight
   - 15:17. Replacement of bulbs of an incandescence
      15.17.2. Back lamp
      + 15.17.3. Top stoplight
      15.17.4. Illumination of a combination of devices
      15.17.5. Illumination of registration plate
      15.17.6. Illumination of salon
   + 15:18. Screen wiper engine
   15:19. Combination of devices
   15:20. Sound signal
   15:21. System cruise control
   15:22. Window regulators with the electric drive
   15:23. System of the central blocking of locks
   15:24. Rear-view mirrors with the electric drive
   15:25. Safety airbag
   + 15:26. Schemes of electric equipment




15.17.2. Back lamp
GENERAL INFORMATION

Elements of fastening of a back lamp on cars with a body "sedan"

 

Fastening of a back lamp on cars with a body "station wagon"

 

PERFORMANCE ORDER
1. On models with a body "sedan" unscrew screws and remove a back lamp (see rice. Elements of fastening of a back lamp on cars with a body "sedan"). Turn the holder of a bulb counterclockwise and remove him from a back lamp. Press and in this situation turn a bulb counterclockwise and take it from the holder of a bulb.
2. On models with a body "station wagon" unscrew screws and remove a back lamp (see rice. Fastening of a back lamp on cars with a body "station wagon"). Press and in this situation turn clockwise a bulb and take it from the holder.
3. Installation is made in the sequence, the return to removal.