Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
- 14. Body
   14.1.1. Security measures when carrying out welding works
   - 14.2. Care of a body
      14.2.1. Preservation
      14.2.2. Polishing
      14.2.3. Removal of spots of pitch
      14.2.4. Removal of insects
      14.2.5. Removal of construction solutions
      14.2.6. Care of details from artificial materials
      14.2.7. Sink of glasses
      14.2.8. Care of rubber consolidations
      14.2.9. Disks of wheels
   + 14.3. Care of an upholstery and rugs
   + 14.4. Repair of insignificant damages of a body
   14.5. Repair of strong damages of a body
   + 14.6. Cowl
   14.7. Trunk lid
   14.8. Back door
   + 14.9. Replacement of racks of support
   14:10. Door upholstery
   + 14:11. Doors
   + 14:12. Lock, cylinder of the lock and handle of opening of a door
   14:13. Door glass
   14:14. Window regulator
   14:15. Front bumper
   14:16. Rear bumper
   14:17. External rear-view mirrors
   + 14:18. Seats
   14:19. Decorative overlay of a combination of devices
   14:20. Casings of a steering column
   14:21. Central console
   14:22. Ware box
   14:23. Check of a condition of seat belts
   14:24. Front grille
   14:25. Engine mudguard
+ 15. Electric equipment


газоанализатор цена.


14.2.2. Polishing

GENERAL INFORMATION

Polishing of a varnish surface is necessary only in case it faded owing to insufficient leaving, influence of dust, harmful gases, weather conditions, and the preserving means cannot restore its gloss.

It is not necessary to apply rough polishing pastes and chemically active polishing means, despite previously good results.

Before polishing the car needs to be washed up and to dry up carefully. To further adhere to the instruction for use of the polishing means.

To make polishing small sites in order to avoid premature drying of polish. After processing of a surface some polishing means it is necessary to make additional preservation. It is forbidden to polish in the open sun. Opaque varnish surfaces cannot be processed the preserving and polishing means.