Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Lower lever of a forward suspension bracket
   13.7. Replacement of the lower hinge of a forward suspension bracket
   - 13.8. Rotary fist
      13.8.2. Installation
   13.9. Back stabilizer of cross stability
   + 13:10. Rack of a back suspension bracket
   13:11. Longitudinal draft of a back suspension bracket
   + 13:12. Levers of a back suspension bracket
   + 13:13. Nave of a back suspension bracket
   + 13:14. Fastener of a back nave
   + 13:15. Steering wheel
   + 13:16. Tips of steering draft
   13:17. Replacement of protective covers of steering transfer
   + 13:18. Steering transfer
   + 13:19. Pump of the amplifier of steering
   13:20. Removal of air from system of steering with the amplifier
   + 13:21. Wheels and tires
   13:22. Angles of installation of wheels
+ 14. Body
+ 15. Electric equipment




13.8.2. Installation

PERFORMANCE ORDER
1. Check that vents on the external end of a power shaft and grooves in a nave pure. Pull a nave over grooves of a power shaft.
2. Pull a rotary fist over a power shaft. Arrange the top part of a rotary fist on a rack and fix by bolts.
3. Screw a nut of fastening of a power shaft to a nave and tighten it the required moment.
4. Establish on a nave a brake disk and a support on a rotary fist.
5. Fix by bolts the spherical hinge on the lower lever of a forward suspension bracket.
6. Establish steering draft on a rotary fist.
7. Establish a wheel and lower the car.