Repair and operation of the Toyota Camry car - 13.19.1. Removal//Toyota Camry of 1992-1997 /

Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
- 13. Suspension bracket
   13.2. General information
   + 13.3. Forward stabilizer of cross stability
   + 13.4. The lobby is resistant
   13.5. Repair of a forward rack
   + 13.6. Lower lever of a forward suspension bracket
   13.7. Replacement of the lower hinge of a forward suspension bracket
   + 13.8. Rotary fist
   13.9. Back stabilizer of cross stability
   + 13:10. Rack of a back suspension bracket
   13:11. Longitudinal draft of a back suspension bracket
   + 13:12. Levers of a back suspension bracket
   + 13:13. Nave of a back suspension bracket
   + 13:14. Fastener of a back nave
   + 13:15. Steering wheel
   + 13:16. Tips of steering draft
   13:17. Replacement of protective covers of steering transfer
   + 13:18. Steering transfer
   - 13:19. Pump of the amplifier of steering
      13.19.1. Removal
   13:20. Removal of air from system of steering with the amplifier
   + 13:21. Wheels and tires
   13:22. Angles of installation of wheels
+ 14. Body
+ 15. Electric equipment



13.19.1. Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Uncover a filling tank of hydraulic system of the amplifier of steering and, using the syringe, pump out liquid from a tank.
3. Lift a forward part of the car and record on supports. Remove the right forward wheel.
4. Remove protection of the right forward wing.
5. Weaken a collar and remove a returnable hose from the pump.
6. Unscrew a special connecting bolt and remove a pressure head hose from the pump.
7. Weaken adjusting and hinged bolts of fastening of the pump and take off a driving belt.
8. Unscrew bolts of fastening and remove the pump.
9. Installation is made in the sequence, the return to removal. Adjust a tension of a driving belt.