Repair and operation of the Toyota Camry car - 12.14.2. Pedal drive//Toyota Camry of 1992-1997 /

Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
- 12. Brake system
   12.2. General information
   12.3. Anti-blocking system of brakes (ABS)
   12.4. Replacement of brake shoes of disk brakes
   + 12.5. Support of disk brakes
   + 12.6. Brake disk
   12.7. Replacement of brake shoes of drum brakes
   + 12.8. Working brake cylinder
   + 12.9. Main brake cylinder
   12:10. Brake pipelines and hoses
   12:11. Pumping of the hydraulic brake system
   + 12:12. Vacuum amplifier of brakes
   12:13. Replacement of brake shoes of the emergency brake on back disk brakes
   - 12:14. Adjustment of the parking brake
      12.14.2. Pedal drive
   + 12:15. Replacement of a cable of the emergency brake
   + 12:16. Stoplight switch
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



12.14.2. Pedal drive

PERFORMANCE ORDER
1. Slowly press a pedal of the parking brake against the stop. At the same time the course of a pedal has to make from 3 to 5 clicks. If the pedal course less than 3 clicks, then blocks of the parking brake not completely depart from a brake disk. If the course does not slow down more than 6 clicks, the parking brake the car.
2. Remove the central console.

3. Weaken a lock-nut and, rotating an adjusting nut, otregul to a ruyta the provision of a cable so that the course of a pedal made 3–6 clicks. Tighten a lock-nut.
4. Install the central console.
5. Establish a brake disk.