Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
- 11. Coupling and power shafts
   11.2. General information
   + 11.3. Check and replacement of a clutch plate
   + 11.4. Release bearing
   + 11.5. Main cylinder of coupling
   + 11.6. Working cylinder of coupling
   11.7. Removal of air from hydraulic system of coupling
   11.8. Starting switch of coupling
   - 11.9. Hinge of Equal Angular Speeds (HEAS)
      11.9.1. Removal
      11.9.2. Installation
   + 11:10. Replacement of protective covers and repair of hinges of equal angular speeds
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

11.9.2. Installation


Installation is made in the sequence, the return to removal taking into account the next moments.

1. Tighten the required moment bolts of fastening of the internal hinge of a power shaft to a driving flange of the transmission.
2. At installation of the left hinge with a lock ring replace a lock ring on the end of a power shaft. Establish a power shaft in differential, having combined vents of a power shaft with flutes of semi-axial gear wheels of differential. Insert a power shaft into the transmission against the stop.
3. Combine vents of a power shaft with grooves in a nave and insert a power shaft into a nave.
4. Fill in oil in the transmission.