Toyota Camry

1992-1997 of release

Repair and operation of the car

Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
+ 10. Automatic transmission
- 11. Coupling and power shafts
   11.2. General information
   + 11.3. Check and replacement of a clutch plate
   + 11.4. Release bearing
   + 11.5. Main cylinder of coupling
   + 11.6. Working cylinder of coupling
   11.7. Removal of air from hydraulic system of coupling
   11.8. Starting switch of coupling
   + 11.9. Hinge of Equal Angular Speeds (HEAS)
   + 11:10. Replacement of protective covers and repair of hinges of equal angular speeds
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment

11.8. Starting switch of coupling


Arrangement of the starting switch of coupling
The starting switch of coupling is located on an arm behind a coupling pedal.

1. Check height of installation and a free wheeling of a pedal of coupling.
2. Check that start of the engine is impossible without pressing of a pedal of coupling.
3. Disconnect the electric socket located on wires of the starting switch of coupling.
4. Using an ohmmeter, check that contacts of the switch become isolated when pressing a pusher.
5. Check that at an otpuskaniye of a pusher of the starting switch of coupling its contacts are disconnected.
6. For replacement of the switch unscrew a nut of fastening and remove the switch.
7. For adjustment of position of the switch press a pedal of coupling and turn the switch so that the pusher of the switch acted from the case on 5 mm.