Toyota Camry

1992-1997 of release

Repair and operation of the car



Toyota Camry
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Capital repairs of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. System of ignition
+ 8. Decrease in toxicity
+ 9. Transmission
- 10. Automatic transmission
   10.2. General information
   + 10.3. Diagnostics
   + 10.4. Adjustment and replacement of a cable of the choice of transfers
   10.5. Check and adjustment of a cable of management of a butterfly valve
   + 10.6. Check, replacement and adjustment of the switch of blocking of a starter
   + 10.7. Lock of blocking of the lever of the choice of transfers
   + 10.8. Replacement of sealing rings
   - 10.9. Check and replacement of support of the transmission
      10.9.1. Removal
      10.9.2. Installation
   10:10. Electronic control system
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment




10.9.2. Installation

PERFORMANCE ORDER
1. Install the hydrotransformer on an entrance shaft of the transmission.
2. Being careful, install the transmission on the engine, at the same time turn the hydrotransformer so that openings under a bolt in a gidrotransfor to Matyora and a plate of the drive were combined.
3. Fix the transmission on the engine by bolts, having tightened them the required moment.
4. Being careful, slowly install the transmission with the engine in a motor compartment of the car.
5. Fix the transmission on the engine by bolts, having tightened them the required moment.
6. Being careful, slowly install the transmission with the engine in a motor compartment of the car.
7. Establish support of the power unit and fix them by bolts.
8. Further installation is made in the sequence, the return to removal.
9. Fill in cooling liquid in the cooling system, engine oil in the engine and oil in the transmission.